transactions supported

 Home | Electronic ignitions | Business conditions | Worldwide delivery | Contacts   

IMFsoft
Direct Ignition CDI 7 - 25V
25.000RPM
The capacitive ignition type
Direct Ignition TCI 3,5 - 25V
25.000RPM
USB 2.0
Universal Ignition 3,5 - 25V
25.000RPM
RS232
Accessories Sensors
Connectors
Coils

Universal ignition

Introduction

Universal Ignition The ignition is developement for the two or four-cycle automobile and motocycle engines. The ignition allow the programmable advance curve and intensity of the excitation two coils. All the functions and optional working ignition regimes can be set by a personal computer. For this reason there is a Ignition Control application that also enables online visual control of real values of turns, pre-ignition (set-up time). To connect the personal computer through ignition the standard extension cable of RS232 link should be used.

The pre-ignition directing is realized by the ignition microprocessor that sets the delay time of ignition (the ignition advance) according to the set curve and actual turns.

Using the extension function input Ex it possible change over the ignition curves. The pre-ignition directing is realized by the conversion of asked pre-ignition curve into schedule of time delays. Depending on actual turns of a motor the individual time delays are chosen from the schedule and via the microprocessor exactly measured and that is how the final effect of set up directing works.

The application Ignition Control newly provides the function of pre-ignition debugging by acceleration brake where the acceleration of motor is watched when repressing its own mass. The acceleration of motor turns is adequate to the twisting moment, which is a ondition.



Price 136 EUR

Buy now!



transactions supported
© 2006 – 2008 IMFsoft, Ltd.